Hot water heat pump ED 300

What is a hot water heat pump?
A hot water heat pump is used to centrally supply hot water to several taps, such as showers, sinks or bathrooms in a house, regardless of the heating system installed. In doing so, it uses the heat energy in the room air to prepare hot water and ensure its operation in a cost-effective, environmentally friendly and energy-saving way. However, since the room temperature is not high enough to heat the water sufficiently, the temperature of the water in the heat pump also rises. This happens when the heat in the air is transferred to the coolant and compressed using a compressor. The temperature of the coolant rises, so this heat is transferred to the water through heat exchange. Hot water comes out!
How does it work?
A heat pump heats water using the surrounding air. This air is transported through a heat exchanger. The heat pump evaporates the water into steam. The steam is compressed in a compressor, which causes the temperature to rise. The pump circulates the hot air through a tube. This tube is wrapped around a kettle containing hot water. This heats the water in the tank. The steam cools down again until it becomes liquid again. This liquid is then pumped back into the evaporator, where the process repeats. Heating hot tap water with a hot water heat pump is very efficient, especially compared to an electric boiler, using much less electricity to provide the same amount of hot water per day.

Main features
The ED 300 is designed for functionality and long service life:
Extremely durable HD steel storage tank and premium internal glass coating
4th generation high performance CFC-free insulation
In standby mode, heat loss is only 20 W!
270 liter tank provides all your family needs 24 hours a day, 7 days a week
Permanent corrosion protection: thanks to the large-sized anode (magnesium anode with automatic wear indicator)
Certified HP efficiency – COP 3.62
Nominal pressure: 10 bar (tested at 13 bar)
Very quiet operation (perception optimized)
3 installation modes: ambient air, outside air, extract air
The extended operating range (incoming air temperature) from -10°C to +35°C guarantees year-round operation in all operating modes.
Automatic hot gas defrost function – increases efficiency
CAF: Continuous Airflow, a function that operates the fan independently of the heat pump to provide controlled ventilation
Plug and Play, quick and easy installation (very easy to install)
Smart management
Smart grid interface: make the most of your photovoltaic energy and/or multi-tariff meters.
The only control device with 3 different energy levels and adjustable savings potential. Sophisticated electronic control device.
Useful functions: BOOST, TIMER, HOLIDAYS, LEGIONELLA PROTECTION, ADJUSTABLE FROST PROTECTION.
Easy to use; large 2-line display, plain text, intuitive one-button operation.

Transportation and installation methods
The ED 300 can be transported in a vertical and horizontal position.
The ED 300 is a “Plug and Play” model. Pre-configured settings ensure that your heat pump is ready to operate
immediately after removing from the packaging.